1.Usage: super fine stainless steel wire drawing

2.Inlet diameter:  Ф0.12mm-Ф0.5mm

3.Outlet diameter:  Ф0.03mm-Ф0.12mm;

4.Maximum drawing speed:  1000MPM/MAX. it is designed as per clients requirements. 

5.Dies：Number:  24 dies (Customer self provided)   Ф25mm*8

No. 1 is independent; No.2~24 are made of cast iron

Pedestal can be adjusted according to the capstan

6.Mechanism surface reduce rate:

From No.1 to No.23          8%

                        No.24                 6% 

7.Drawing method:  4 spools horizontal arrangement; horizontally sliding continuous drawing

8.Motor:  Drive motor: 5.5HP (4KW) AC frequency converter control

           Spooling motor: 2HP (1.5KW) AC frequency converter control

9.Frame:  welded by steel plates

10.Transmission:  All transmission by flat belt;

11.Capstan:  Bearing steel; four 11-tier capstans; one single tier capstan for final drawing

12.Lubrication system:  Spray type plus immersing type ; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die

13.Spool dimension:  Outer diameter DIN160 DIN200; (or according to customer’s requirements)

14.Capacity for spool receiving:  5-10KG

15.Spooling control method: Weight balance by swing arm; automatically revise spooling tension

16.Bobbin loading & unloading type:  single bobbin fixed with screw (with loading &unloading cart)

17.Brake:  5KG magnetic brake 

18.Protection cover:  Grille for transmission area;

Stainless steel plate for drawing area;

                             Sealed cover with 3 inspection windows for spooling area.

19.Electric parts:  Electric control parts made in China and Taiwan or overseas, top-class brand

20.Power source:  Three-phase 415V 50HZ or according to your requirments

21.Traversing unit: 

Traversing system:  110W synchronizing motor traversing; slide-rail bearing

Traversing width:  200mm/Max