LISTRONG LISTRONG

News Center

Share latest company information & industry trends

/
/
Precautions for installation and use of wire drawing machine

News Categories

Check Category

Contact Details

Precautions for installation and use of wire drawing machine

  • Categories:News
  • Time of issue:2021-10-08 11:08

(Summary description)When the wire drawing machine is installed and used, it must be maintained in accordance with normal operating specifications and maintained regularly to extend the service life of the machine

Precautions for installation and use of wire drawing machine

(Summary description)When the wire drawing machine is installed and used, it must be maintained in accordance with normal operating specifications and maintained regularly to extend the service life of the machine

  • Categories:News
  • Time of issue:2021-10-08 11:08
  • Views:
Information
Pay attention to the following four items when installing and using the wire drawing machine:
 
(1) The installation foundation of the wire drawing machine must be very stable to avoid vibration;
 
(2) During installation, the drawing axis of the wire must be symmetrical with the center line of the die hole through debugging, so that the stress of the wire and the drawing die is uniform;
 
(3) Avoid frequently starting and stopping during the drawing process, because the friction caused by the tensile stress at the start of drawing is much greater than the friction during normal drawing, which will inevitably increase the wear of the die.
 
(4) In addition, the wire used for drawing must undergo pretreatment: surface pretreatment and heat treatment.
 
a. Surface pretreatment: For wire with dirty surface and more impurities, it must be cleaned and dried before drawing;
 
  For the wire with more oxide scale on the surface, it must be finely acidified and dried before drawing;
 
  For wires with peeling, pits, heavy leather and other phenomena on the surface, they must be polished by a grinder and then drawn;
 
b. Heat treatment: For wires with excessive hardness or uneven hardness, annealing or tempering should be used to reduce the hardness first, and the wire should maintain good hardness uniformity before drawing.
Keyword:

Scan the QR code to read on your phone

Relevant Information
Share the latest developments of the company and industry exhibition information with you.
Related Products
A professional wire and cable production equipment manufacturer
CopyRight © 2021 LISTRONG Mechanical & Electrical Co., Ltd. All rights reserved.   Listrong Machinery   Copper Wire Drawing Machine
TOP